Nicholls and Cooke

Bay Poles: Head & Base Plates (Feet)

Head and Base Plates

The Nicholls & Cooke system is based on 5mm thick steel finished by electroplating, galvanising or in zinc compound.

Each plate is drilled with two 10mm diameter holes for securing. Standard plates are 50mm wide with a long edge of 120mm. This enables a large load spreading area of approx 8500 sq.mm. (depending on internal angle of plate).

Off the shelf Feet options:

  • All angles between 90 - 180
  • Square plates - 75mm, 100mm, 125mm and 150mm
  • Offset 180 feet for doors etc.
  • Cavity wall spreader plates (Male and female fitting set in the centre of the cavity unless requested otherwise)

Our patented 3 Part System reduces the excess pressure that other systems offered by different companies incur. Other systems made up of more than 3 parts tend to have reduced load bearing capabilities which can result in the pole bending inside the window.